12 Rockwell Automation Publication IASIMP-QS023B-EN-P - December 2012
Preface
Choose to Integrate Optional Devices
You can integrate multiple optional devices into a CompactLogix 5370 L3 control system. You
can use these devices on DeviceNet or EtherNet/IP networks.
This table describes optional devices you might use in a CompactLogix 5370 L3 control
controller system and what resources to use for each.
Table 1 - Devices in Logix5000 Control System
Device Type Product Line
(1)
(1) You can use other I/O modules, drives, and HMI terminals in Logix5000 control systems. These product lines are used for example purposes.
Additional Resource with More Information
Distributed I/O POINT I/O Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network
Quick Start, publication IASIMP-QS026
Logix5000 Control Systems: Connect POINT I/O Modules over an EtherNet/IP Network
Quick Start, publication IASIMP-QS027
Drives PowerFlex40 Logix5000 Control Systems: Connect PowerFlex 40 Drives over a DeviceNet Network
Quick Start, publication IASIMP-QS028
Logix5000 Control Systems: Connect PowerFlex 40 Drives over an EtherNet/IP
Network Quick Start, publication IASIMP-QS029
PowerFlex 70 Logix5000 Control Systems: Connect PowerFlex 70 Drives over a DeviceNet Network
Quick Start, publication IASIMP-QS030
Logix5000 Control Systems: Connect PowerFlex 70 Drives over an EtherNet/IP
Network Quick Start, publication IASIMP-QS031
Kinetix 350 Logix5000 Control Systems: Connect Kinetix 350 Drives over an EtherNet/IP Network
Quick Start, publication IASIMP-QS032
HMI terminals PanelView Plus Logix5000 Control Systems: Connect PanelView Plus Terminals over an EtherNet/IP
Network Quick Start, publication IASIMP-QS033
To Next Page
Loading...
Need help?
General
