Allen-Bradley 1769-L36ERM Quick Start

Rockwell Automation Publication IASIMP-QS023B-EN-P - December 2012 57
Configure the DeviceNet Network Chapter 4
Set the 1769-SDN Module’s Node Address
1. Start the software.
2. From the Tools pull-down menu,
choose Node Commissioning.
3. Click Browse.
When the Device Selection dialog
box appears, you can browse to the
1769-SDN module over an
EtherNet/IP network or USB
connection. This example uses a
USB connection.

Allen-Bradley 1769-L36ERM Specifications

General

Brand	Allen-Bradley
Model	1769-L36ERM
Category	Controller
Language	English