Allen-Bradley 1783-BMS20CL User Manual

Installation Instructions
Original Instructions
Stratix 5700 Ethernet Managed Switches
Catalog Numbers 1783-BMS12T4E2CGL, 1783-BMS12T4E2CGP, 1783-BMS12T4E2CGNK, 1783-BMS06SL,
1783-BMS06SA,1783-BMS06TL, 1783-BMS06TA,1783-BMS06SGL, 1783-BMS06SGA,1783-BMS06TGL, 1783-BMS06TGA,
1783-BMS10CL,1783-BMS10CA, 1783-BMS10CGL,1783-BMS10CGA, 1783-BMS10CGN, 1783-BMS10CGP,
1783-BMS20CL,1783-BMS20CA,1783-BMS20CGL,1783-BMS20CGP,1783-BMS20CGN, 1783-BMS20CGPK, 1783-BMS4S2SGL,
1783-BMS4S2SGA
Topic Page
Required Tools 6
Site Requirements 7
Mount the Switch 7
Ground the Switch 8
Wire the DC Power Source 9
Install the Power Connectors on the Switch 10
Wire External Alarms 11
Install the Alarm Relay Connector on the Switch 13
Wire the PoE Power Source 13
Install the PoE Power Connector on the Switch 14
Install or Remove an SFP Module 14
Install or Remove the SD Card 15
Connect to 10/100 and 10/100/1000 Ports 16
Connect to 10BASE-T, 100BASE-TX, or 1000BASE-T Ports 16
Connect to PoE Ports 17
Connect to SFP Module Ports 17
Connect to a Dual-purpose Port 18
Confirm Installation 18
Remove Power from a Switch with PoE 18
Remove the Switch from the DIN Rail 19
Specifications 19
Additional Resources 20

Allen-Bradley 1783-BMS20CL Specifications

General

Product Type	Managed Ethernet Switch
Number of Ports	20
Layer	Layer 2
Power Supply	24V DC
Mounting Type	DIN Rail
Enclosure Type	Metal
Port Type	Copper
Operating Temperature	-40 to 70 °C
Weight	1.5 kg

Summary

Stratix 5700 Ethernet Managed Switches Installation

Environment and Enclosure

Covers environmental requirements and enclosure specifications for safe operation.

Electrical Safety Considerations

Details critical electrical safety guidelines for power supply and wiring.

Required Tools

Lists essential tools needed for the installation and setup process.

Site Requirements

Specifies site conditions and clearances necessary for proper installation.

Mount the Switch

Provides instructions on how to properly mount the switch unit.

Ground the Switch

Explains the procedure for grounding the switch for safety and protection.

Wire the DC Power Source

Guides on connecting the DC power source to the switch.

Install or Remove an SFP Module

Details the process for installing or removing SFP modules for network connectivity.

Connect to 10/100 and 10/100/1000 Ports

Instructions for connecting to standard Ethernet ports on the switch.

Confirm Installation

Steps to verify the successful installation and startup of the switch.

Specifications

Technical specifications and attribute details for the Stratix 5700 switches.

Additional Resources

Provides links to related documentation and support information.