Allen-Bradley 1783-BMS20CGN User Manual

Installation Instructions
Original Instructions
Stratix 5700 Ethernet Managed Switches
Catalog Numbers 1783-BMS12T4E2CGL, 1783-BMS12T4E2CGP, 1783-BMS12T4E2CGNK, 1783-BMS06SL,
1783-BMS06SA,1783-BMS06TL, 1783-BMS06TA,1783-BMS06SGL, 1783-BMS06SGA,1783-BMS06TGL, 1783-BMS06TGA,
1783-BMS10CL,1783-BMS10CA, 1783-BMS10CGL,1783-BMS10CGA, 1783-BMS10CGN, 1783-BMS10CGP,
1783-BMS20CL,1783-BMS20CA,1783-BMS20CGL,1783-BMS20CGP,1783-BMS20CGN, 1783-BMS20CGPK, 1783-BMS4S2SGL,
1783-BMS4S2SGA
Topic Page
Required Tools 6
Site Requirements 7
Mount the Switch 7
Ground the Switch 8
Wire the DC Power Source 9
Install the Power Connectors on the Switch 10
Wire External Alarms 11
Install the Alarm Relay Connector on the Switch 13
Wire the PoE Power Source 13
Install the PoE Power Connector on the Switch 14
Install or Remove an SFP Module 14
Install or Remove the SD Card 15
Connect to 10/100 and 10/100/1000 Ports 16
Connect to 10BASE-T, 100BASE-TX, or 1000BASE-T Ports 16
Connect to PoE Ports 17
Connect to SFP Module Ports 17
Connect to a Dual-purpose Port 18
Confirm Installation 18
Remove Power from a Switch with PoE 18
Remove the Switch from the DIN Rail 19
Specifications 19
Additional Resources 20

Allen-Bradley 1783-BMS20CGN Specifications

General

Brand	Allen-Bradley
Model	1783-BMS20CGN
Category	Switch
Language	English

Summary

Environment and Enclosure

Prevent Electrostatic Discharge

Guidelines for preventing electrostatic discharge damage to equipment.

Safety and Compliance

Electrical Safety Considerations

Power supply and electrical safety requirements for equipment operation.

Special Conditions for Safe Use

Specific operational and environmental conditions for safe equipment usage.

European Hazardous Location Approval

Approval details for equipment use in hazardous locations in Europe.

North American Hazardous Location Approval

Ground the Switch

Wire the DC Power Source

Wire External Alarms

PoE Power and Alarm Relay Connections

Wire the PoE Power Source

Instructions for wiring the DC power source for switches with PoE ports.

SFP Module and PoE Connector Installation

Install or Remove an SFP Module

Procedure for installing or removing SFP modules.

Installation Confirmation and Removal

Confirm Installation

Verifying the successful installation and startup of the switch.

Remove Power from a Switch with PoE