Rockwell Automation Publication 2080-UM004C-EN-E - March 2015 83
Quickstart Appendix B
Browse Using the Micro800 Pass Through
Browsing the 2080-DNET20 plug-in from the controller backplane through
EtherNet/IP.
Browsing the 2080-DNET20 plug-in from the controller backplane through USB.
To use the controller pass through feature, the following firmware
revisions are required:
• Micro820/Micro830/Micro850 controller firmware revision 8.011 or
higher.
• 2080-DNET20 plug-in firmware revision 2.011 or higher.
To Next Page
Loading...
