Allen-Bradley CompactLogix 5370 L1 Quick Start

40 Rockwell Automation Publication IASIMP-QS024C-EN-P - August 2014
Chapter 2 Prepare the Computer and Load Controller Firmware
7. Expand the USB driver, and select your
controller.
8. Click OK.
9. If it’s not in the position, move the mode
switch on the controller to the REM
position.
10. Choose the desired firmware revision and
click Next.
TIP
Consider the following:
• If the Current Revision matches
the firmware revision that is
shown in the box below it, click
Cancel. You are finished with
this task.
• This example uses firmware
revision 21.011.49. Your
firmware revision is another
number.
You can access the latest firmware
revision at the Rockwell
Automation Technical Support
webpage.
RUN
REM
PROG

Allen-Bradley CompactLogix 5370 L1 Specifications

General

Brand	Allen-Bradley
Model	CompactLogix 5370 L1
Category	Controller
Language	English