66 Rockwell Automation Publication 1756-RM100F-EN-P - October 2018
Chapter 3 Replacement Considerations with CompactLogix and Compact GuardLogix Systems
Security Tab
The Security Tab lets you see the controller security settings, for example, the
Security Authority choice. Security settings are configured when you create the
project.
With the Logix Designer application, version 28 or later, the controllers
support additional parameters in the Security Authority section.
Figure 13 - Controller Properties Dialog Box - Security Tab
Click the Configure button to access the Configure Changes to Detect dialog
box. Use the dialog box to choose the events you wish to monitor or ignore in
the controller.
For more information on Security settings, see the FactoryTalk® Security
System Configuration Guide, publication FTSEC-QS001
.
5370 Controllers 5380 Controllers
To Next Page
Loading...
Need help?
General
