Rockwell Automation Publication 1756-RM100F-EN-P - October 2018 9
Preface
This manual is intended to offer guidelines when you replace the following:
• ControlLogix® 5570 controller with a ControlLogix® 5580 controller.
Guidelines that reference a ControlLogix 5570 controller also apply to a
ControlLogix 5560 controller.
• CompactLogix™ 5370 L3 controller with a CompactLogix 5380
controller
• GuardLogix® 5560 or GuardLogix 5570 controller with a GuardLogix
5580 controller.
• Compact GuardLogix 5370 L3 controller with a Compact GuardLogix
5380 controller
Summary of Changes
This manual contains new and updated information as indicated in the
following table.
Additional Resources
These resources contain information about related products from
Rockwell Automation.
These documents contain more information about Logix 5000™ controllers.
Topic Page
Added information regarding GuardLogix 5580 and Compact GuardLogix 5380
controllers.
Throughout
Added Chapter 4: Replacement Considerations with Safety Applications 83
Added information on the AXIS_CIP_Drive Data Type for Studio 5000 Logix Designer®
V31.00.00
108
Table 1 - Additional Resources
Resource Description
• EtherNet/IP™ Communication Modules in Logix 5000™ Control Systems, publication ENET-UM004
• EtherNet/IP Network Configuration User Manual, publication ENET-UM001
• ControlNet® Network Configuration User Manual, publication CNET-UM001
• DeviceNet® Network Configuration User Manual, publication DNET-UM004
Networks
• Logix 5000 Controllers Common Procedures Programming Manual, publication 1756-PM001
• Logix Controllers Instructions Reference Manual, publication 1756-RM009
• Logix 5000 Controllers Advanced Process Control and Drives Instructions Reference Manual, publication 1756-RM006
• Logix 5000 Controllers Motion Instructions Reference Manual, publication MOTION-RM002
• Logix 5000 Controllers Import/Export Reference Manual, publication 1756-RM084
Logix 5000 Software and Programming
To Next Page
Loading...
Need help?
General
