ControlLogix Current Loop Output Module 17
Publication 1756-5.36 - September 1999
Temperature code rating:
The following warnings apply to products having CSA certification for use in hazardous locations.
Explosion hazard!
•
Substitution of components may impair suitability for Class I, Division 2.
•
Do not replace components unless power has been switched off or the area is
known to be non-hazardous.
•
Do not disconnect equipment unless power has been switched off or the area
is known to be non-hazardous.
•
Do not disconnect connectors unless power has been switched off or the area
is known to be non-hazardous. Secure any user-supplied connectors that mate
to external circuits on this equipment by using screws, sliding latches,
threaded connectors, or other means such that any connection can withstand
a 15 Newton (3.4 lb) separating force applied for a minimum of one minute.
•
If the Product contains batteries, they must only be changed in an area known
to be non-hazardous.
CSA logo is a registered trademark of the Canadian Standards Association.
CL I, DIV 2
GP A,B,C,D
TEMP
Look for temperature
code rating here.
Allen-Bradley Drives
To Next Page
Loading...
Need help?
General
