86 Rockwell Automation Publication 1756-RM012B-EN-P - April 2018
Appendix C Reaction Times
Configure the Safety Task Period and Watchdog
The safety task is a periodic timed task. You select the task period, priority, and
watchdog time via the Task Properties - Safety Task dialog box in your Studio
5000 Logix Designer project.
To access the safety task period and watchdog time settings, right-click the
Safety Task and choose Properties.
The priority of the safety task is not a safety concern, as the safety task
watchdog monitors if a higher priority task interrupts the task.
Access Produced/Consumed Tag Data
To view or configure safety-tag connection data, follow these steps.
1. In the configuration tree, right-click Controller Tags and choose Edit
tags.
2. In the Tag Editor, right-click the name of the tag and choose Edit
Properties.
3. Click Connection.
To Next Page
Loading...
