Publication 2711-UM014B-EN-P
3-16 Configuring the Terminal
IP Address
A unique address identifying the PanelView node on the EtherNet/IP
network. The IP address is formatted as four sets of decimal numbers
with periods between them (10.0.0.1). The range of values for the first
set of decimal numbers is 1 - 255, unless all fields are set to 0.0.0.0.
The range of values for the last three sets of decimal numbers is 0 -
255. The default value is 0.0.0.0. A change is not effective until you
reset the terminal.
Subnet Mask
A 32-bit value forming the PanelView terminal’s subnet mask. This
parameter interprets IP addresses when the network is divided into
multiple networks. The subnet mask is formatted as four sets of
decimal numbers with periods between them (255.255.255.1). The
range of values for the first set of decimal numbers is 1 - 255. The
range of values for the last three sets of decimal numbers is 0 - 255.
The value of 0.0.0.0 is not a valid subnet mask.
Interscan Delay
The length of time the PanelView terminal delays before re-reading
data from the logic controller. Valid values range from 100 to 1,000
milliseconds. The default is 100.
Restart Terminal
Resets the terminal.
Exit
Returns to the Configuration Mode menu.
To Next Page
Loading...
Need help?
General
