Need help?Do you have a question about the Allen-Bradley SensaGuard 440N-Z21S16A and is the answer not in the manual?
General| Product Type | Safety Interlock Switch |
|---|---|
| Model Number | 440N-Z21S16A |
| Category | Switch |
| Housing Material | Plastic |
| IP Rating | IP67 |
| Voltage | 24V DC |
| Connection Type | Cable with Connector |
| Operating Temperature Range | -25°C to 70°C |
| Voltage Rating | 24V DC |
| Enclosure Rating | IP67 |
| Operating Temperature | -25°C to 70°C |
| Actuator Material | Stainless Steel |
| Type | Safety Switch |
| Mechanical Life | 1, 000, 000 operations |
| Electrical Life | 100, 000 cycles |
Guidance on installing the SensaGuard unit correctly according to specified steps and personnel.
Highlights essential warnings and attention notes regarding device tampering, bypassing, and power supply requirements.
Details safety ratings, certifications, and relevant industry standards for the device.
Provides data on sensing distance, misalignment, output current, voltage, and response times.
Outlines operating temperature, humidity, washdown rating, and shock/vibration resistance.
Lists built-in protection features and the expected electrical life of the device.
Illustrates the physical dimensions of the 18 mm and 30 mm actuators and the sensor.
Explains status indicators, mounting procedures, and torque specifications for installation.
Specifies minimum spacing and misalignment tolerances for optimal sensor performance.
Details the pinout for wiring and provides diagnostic information based on LED indicators.
Offers guidance for diagnosing and resolving common issues with the SensaGuard system.
Details troubleshooting steps for systems configured with multiple sensors in series.
Illustrates the timing of sensor outputs and response times under various operating conditions.
Provides diagrams for connecting SensaGuard units with MSR127TP and MSR127RP safety relays.
Illustrates wiring configurations using MSR200 series safety contactors and light curtains.
Lists compatible Allen-Bradley MSR series relays and safety I/O for use with SensaGuard.
Outlines weekly checks, inspection procedures, and replacement policy for the device.
States compliance with European Machinery Directive and relevant safety standards.
To Next Page