Need help?Do you have a question about the Allen-Bradley SensaGuard 440N-Z21S16H and is the answer not in the manual?
General| Product Type | Safety Interlock Switch |
|---|---|
| Model Number | 440N-Z21S16H |
| Category | Switch |
| Sensing Distance | 16 mm |
| Housing Material | Plastic |
| Connection | Cable |
| Cable Length | 2 m |
| Number of Contacts | 2 |
| Supply Voltage | 24V DC |
| Voltage Rating | 24V DC |
| Enclosure Rating | IP67 |
| Mechanical Life | 1, 000, 000 cycles |
| Electrical Life | 100, 000 cycles |
| Actuator Material | Stainless Steel |
| Number of Inputs | 1 |
| Number of Outputs | 1 |
| Operating Temperature | -25°C to +70°C |
| Connection Type | Cable |
| Communication Protocol | Not Applicable |
Details safety ratings, certifications, standards, and operating parameters for the unit.
Specifies sensing distance, assured make/break, misalignment, and output current.
Covers operating temperature, humidity, washdown rating, shock, vibration, and radio frequency.
Provides detailed physical measurements of the 18 mm and 30 mm actuators and sensor.
Explains the status indicators (LEDs) and their meaning for unit operation.
Instructions on how to correctly mount the switch and actuator, including torque specifications.
Illustrates acceptable lateral misalignment tolerances for sensing distance.
Details the pin assignments, wire colors, and signals for the SensaGuard unit.
Explains the unit indicators (LEDs) and provides troubleshooting steps for faults.
Provides weekly checks for correct operation and signs of damage or tampering.
States that units should be replaced, not repaired, if malfunction or damage occurs.
Declares conformity with EU directives and relevant safety standards for the products.
To Next Page