Model Number: ________________________
Serial Number: ________________________
Date Purchased: ______________________
Purchased From: ______________________
Unit Identification Plate Location:
An identification plate listing the model number and the serial number is attached to each unit and is located on the rear
lower left side of mainframe. Refer to Figure 1 for serial number and model number location. This plate should not be
removed at any time.
Please record the information found on this plate below so it will be available should the identification plate become lost
or damaged. When ordering parts or requesting service information, you will ALWAYS be asked to specify the model and
serial numbers of the machine.
FILL IN FOR FUTURE REFERENCE
Figure 1
Serial Number Location
Identification Plate
Unit Identification
The serial number is located on the
barrel lock tab on the motor end.
038479 Page 11
To Next Page
Loading...
