Alliance Laundry Systems DTB75CG - Page 4

2 70410501
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
28. Igniter Does Not Glow – Johnson Controls
Glow-Bar System........................................................................42
29. Igniter Glows Constantly – Johnson Controls and
White Rodgers Glow-Bar System...............................................43
30. Igniter Glows, Cycles Off But Burner Does Not Ignite
– Johnson Controls Glow-Bar System........................................44
31. Igniter Does Not Glow – White Rodgers Glow-Bar System......45
32. Igniter Glows, Cycles Off But Burner Does Not Ignite
– White Rodgers Glow-Bar System............................................46
33. Igniter Sparks, No Main Burner Ignition
– Instant Electronic Ignition........................................................47
34. CSH OM Models: No Heat With Cycle Selected,
Unit Running and Calling For Heat............................................48
35. OM Models: No Start With Cycle Selected, Start Button
Pressed and Door Closed ............................................................50
36. OM Models: No Display After Selecting One Of The
ON/SELECT Keys......................................................................52
37. CE OM Models: No Heat With Cycle Selected, Unit
Running and Calling For Heat ....................................................53
38. CG OM Models: No Heat With Cycle Selected, Unit
Running and Calling For Heat ....................................................55
39. OM Models: No Fan Motor Rotation With Cycle Selected
and Start Pressed.........................................................................57
40. MM Models: Fan Motor Does Not Run With Door Closed,
Cycle Selected and Start Button Pressed ....................................58
41. MM Models: Cylinder Motor Does Not Run or Reverse With
Door Closed, Cycle Selected and Start Button Pressed In
Reversing Mode or Nonreversing Mode.....................................59
42. MM Models: No Heat With Cycle Selected, Unit Running
and Calling For Heat...................................................................61
43. MM Models: No Heat With Cycle Selected, Unit Running
and Calling For Heat...................................................................63
44. OM Reversing Models: No Cylinder Rotation or Reversing
Capabilities..................................................................................65
45. MM Models: No Display After Pressing the ON/SELECT
Keys ............................................................................................67
46. MM Models: Motor Does Not Run With Door Closed, Cycle
Selected and Start Button Pressed...............................................68
47. MM Models: Cylinder Motor Does Not Run or Reverse With
Door Closed, Cycle Selected and Start Button Pressed In
Reversing Mode or Nonreversing Mode.....................................69
48. MM Nonreversing Models: Motor Does Not Run With Door
Closed, Cycle Selected and Start Button Pressed .......................71
49. CD Models: No Start With Vend Satisfied and Start Button
Pushed.........................................................................................73
50. CD Models: No Heat With Vend Satisfied and Unit Running ...75
51. CD Models: No Heat With Vend Satisfied and Unit Running ...77
52. CD Models: No Start With Vend Satisfied and Start Button
Pushed.........................................................................................79
53. CD Models: No Start With Vend Satisfied and Start Button
Pushed.........................................................................................81
Section 4 – Adjustments........................................................................82
54. Cylinder Clearance......................................................................82