Alliance Laundry Systems UTF75N - System Menu Navigation Flow

Start a Cycle
1. From the Approach Page, select "I'm Ready to Dry" (refer to
Figure 19 ).
TMB1941R_SVG
Figure 19
2. Select a cycle from the All Cycles Page (refer to Figure 20 ).
TMB1963R_SVG
Figure 20
3. The Cycle Review page will be displayed. Review the cycle
options and if satisfied with chosen cycle, touch START to
begin the cycle (refer to Figure 21 ). Touch
if you want
to select a different cycle.
TMB1921R_SVG
Figure 21
NOTE: If the door is open when the START button is
pressed, the Cycle Run page will display and
prompt user to close the door.
4. The control displays the Cycle Run Page until the cycle is
complete.
Close Door Menu
TMB1944R_SVG
Figure 22
The control displays the Close Door Menu when the loading or
lint door is open when starting a cycle or while resuming a cycle.
Close the door to start or resume the cycle.
Machine Cycle Definition and Operation
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
25 Part No. 70705301ENR2