Allied Systems LONG REACH FLN Series User Manual

45-009 REV. 8/20
32
6.4 Cylinder Inspection
Inspect the cylinder tube bore for:
1. Deep scratches or nicks.
2. Signs of galling or excessive wear.
3. Out-of-roundness or deformities of the barrel.
Inspect the piston for:
1. Scratches or nicks on seal grooves.
2. Wear on O.D.
Inspect the cylinder rod for:
1. Scratches or nicks on the rod surface.
2. Straightness of the rod.
3. Damaged threads.
Inspect the gland cap for:
1. Scratches or nicks in seal grooves.
2. Damaged threads or spanner wrench holes.
3. Excessive wear in bore.
Replace any component found to be defective.

Allied Systems LONG REACH FLN Series Specifications

General

Brand	Allied Systems
Model	LONG REACH FLN Series
Category	Lifting Systems
Language	English