Allied Systems W6F User Manual

27
PROBLEM POSSIBLE CAUSE CORRECTION
Forward or reverse oil
clutch not releasing.
Broken or weak release springs. Check springs and replace as necessary.
Warped frictions or separators. Replace as necessary.
Lube pressure high. Test and re-set cooling oil relief valve.
Forward clutch engaging
or releasing slowly.
Improper orientation of forward
clutch and clutch shaft.
Remove and reinstall shaft with proper alignment,
see Section 4 of Service Manual.
Figure 9 - Troubleshooting Analysis Chart
Operation

Allied Systems W6F Specifications

General

Brand	Allied Systems
Model	W6F
Category	Winches
Language	English