Allied Systems W6F User Manual

35
Tractor or Skidder Operation
Step 1. The tractor or skidder is moved to an area where
a load will be connected. The operator moves the power
control lever to the LINE-OUT or the FREESPOOL control
lever into FREESPOOL position so that the wire rope can
be pulled from the winch drum.
Step 2. A load (logs) is connected to the wire rope. The
operator moves the FREESPOOL control lever to the
NORMAL OPERATION position.
Operating Techniques
Operating Techniques
Note: Black dots indicate the
position of the control levers.
OR

Allied Systems W6F Specifications

General

Brand	Allied Systems
Model	W6F
Category	Winches
Language	English