Allied Telesis AR Series User Manual

C613-22104-00 REV B Firewall/NAT Rules, Entities and Performance | Page 36
Configuring IP Reputation Advanced Network Protection
Configuring IP Reputation
This section shows an example of how to configure IP Reputation.
By default, IP Reputation protection is disabled and you need to explicitly enable it
.
Step 1: Enter the IP Reputation mode.
awplus#configure terminal
awplus(config)#ip-reputation
Step 2:
Set the IP Reputation database provider.
awplus(config-ip-reputation)#provider proofpoint
Step 3:
Enable IP Reputation protection.
awplus(config-ip-reputation)#protect
Step 4:
(Optional) Configure action for a category.
awplus(config-ip-reputation)#category P2P action deny
Step 5:
Verify IP Reputation configuration.
awplus#show ip-reputation
Output 3: Example output from the console
awplus#show ip-reputation
Status: Enabled (Active)
Provider: Proofpoint
Resource version: 1.0
Resource update interval: 1 hour

Allied Telesis AR Series Specifications

General

Brand	Allied Telesis
Model	AR Series
Category	Firewall
Language	English