Chapter 9: File System
162 Section II: Advanced Operations
Working with Flash Memory
The flash memory in the AT-9400 Switch stores the file system and the
permanent event log.
Displaying
Information
about the Flash
Memory
To display information about the flash memory, perform the following
procedure:
1. From the Main Menu, type 5 to select System Administration.
2. From the System Administration menu, type 9 to select System
Utilities.
3. From the System Utilities menu, type 1 to select File Operations.
The FIle Operations menu is shown in Figure 47 on page 147.
4. From the File Operations menu, type F to select Display Flash
Information.
The Display Flash Information menu is shown in Figure 51.
Figure 51. Display Flash Information Menu
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Display Flash Information
Flash:
------------------------------------------------------
Files 4096 bytes (2 files)
Free 8219648 bytes
Total 8223744 bytes
U - Update Display
R - Return to Previous Menu
Enter your selection?
To Next Page
Loading...
