AT-S63 Management Software Menus User’s Guide
Section II: Advanced Operations 201
7. To view the events of a particular AT-S63 software module, type 7 to
select Event Module and enter the module. To specify more than one
module, separate them by a comma—for example, “system, stp,
ptrunk.” The default is ALL, which displays the events of all the
modules.
The AT-S63 Management Software consists of modules, each
responsible for a different part of switch operation. You can instruct the
switch to display only those events that were generated by specific
modules. Table 1 lists of modules.
Table 1. AT-S63 Modules
Module Name Description
ALL All modules
ACL Access control list
CFG Switch configuration
CLASSIFIER Classifiers used by ACL and QoS
CLI Command line interface commands
DOS Denial of service defense
ENCO Encryption keys
ESTACK Enhanced stacking
EVTLOG Event logs
FILE File system
GARP GARP GVRP
HTTP Web server
IGMPSNOOP IGMP snooping
IP System IP configuration
LACP Link Aggregation Control Protocol
MAC MAC address table
MGMTACL Management access control list
MLDSNOOP MLD snooping
PACCESS 802.1x port-based access control
PCFG Port configuration
PKI Public Key Infrastructure
PMIRR Port mirroring
To Next Page
Loading...
Need help?
General
