Allied Telesis AT-9400 User Manual

Chapter 33: Encryption Keys
596 Section IX: Management Security
Creating an Encryption Key
This section contains the procedure for creating an encryption key pair.
Caution
Key generation is a CPU-intensive process. Because this process
may affect switch behavior, Allied Telesis recommends creating
keys when the switch is not connected to a network or during
periods of low network activity.
To create an encryption key, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 71 on page 220.
2. From the Security and Services menu, type 7 to select Keys/Certificate
Configuration.
The Keys/Certificate Configuration menu is shown in Figure 221.
Figure 221. Keys/Certificate Configuration Menu
3. From the Keys/Certificates Configuration menu, type 2 to select Key
Management.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Keys/Certificates Configuration
1 - Switch Distinguished Name (DN)
2 - Key Management
3 - Public Key Infrastructure (PKI) Configuration
R - Return to Previous Menu
Enter your selection?

Allied Telesis AT-9400 Specifications

General

Brand	Allied Telesis
Model	AT-9400
Category	Software
Language	English