AT-S63 Management Software Menus User’s Guide
Section I: Basic Operations 77
Resetting a Port
Resetting a port is useful in situations where a port is having problems
establishing a valid connection to its end node. Resetting a port does not
change any of its parameter settings.
To reset a port, perform the following procedure:
1. From the Main Menu, type 1 to select Port Configuration.
The Port Configuration menu is shown in Figure 13 on page 62.
2. From the Port Configuration menu, type 1 to select Port Configuration.
The following prompt is displayed:
Enter port-list ->
3. Enter the number of the port you want to reset. You can reset more
than one port at a time. You can specify the ports individually (for
example, 5,7,22), as a range (for example, 18-23), or both (for
example 1,5,14-22).
The Port Configuration menu is shown in Figure 15 on page 65.
4. From the Port Configuration menu, type X to select Reset Port.
To Next Page
Loading...
Need help?
General
