AT-S63 Management Software Menus User’s Guide
Section VI: Virtual LANs 511
Displaying the GVRP State Machine
To display the GVRP state machine, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Configuration.
The VLAN Configuration menu is shown in Figure 171 on page 472.
2. From the VLAN Configuration menu, type 6 to select Configure GARP-
GVRP.
The GARP-GVRP menu is shown in Figure 180 on page 496.
3. From the GARP-GVRP menu, type O to select Other GVRP
Parameters menu.
The Other GVRP Parameters menu is shown in Figure 184 on page
502.
4. From the Other GVRP Parameters menu, type 4 to Display GVRP
State Machine.
The GVRP State Machine menu (page 1) is shown in Figure 189.
Figure 189. GVRP State Machine Menu (page 1)
5. Enter a VLAN ID.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
GVRP State Machine
Enter a VLAN ID for displaying the state machine: [1 to 4094] -> 1
To Next Page
Loading...
