iii
Electrical Safety and Emissions Compliance
Statement
For AT-FS716 and AT-FS716E
Standards: This product meets the following standards.
RFI Emission EN55022 Class A ! 1
Warning: In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures. ! 2
Power to the hub must be sourced only from the adapter. (AT-FS716E)
! 3
U.S. Federal Communications Commission
Radiated Energy
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and , if not installed and used in accordance with this instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Note: Modifications or changes not expressly approved of by the manufacturer or the
FCC, can void your right to operate this equipment.
Canadian Department of Communications
This Class A digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur
le matériel brouilleur du Canada.
To Next Page
Loading...
