AT-FS724L Fast Ethernet Switch Installation Guide
27
1RFI Emission FCC Class B, EN55022 Class B,
VCCI Class B, C-TICK
2 Warning: In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate
measures.
3 Immunity EN55024
4 Electrical Safety EN60950 (TUV), UL60950 (
c
UL
us
)
5 Electrical Notices
Warning: ELECTRIC SHOCK HAZARD
To prevent ELECTRIC shock, do not remove the cover. No user-serviceable
parts inside. This unit contains HAZARDOUS VOLTAGES and should only
be opened by a trained and qualified technician. To avoid the possibility of
ELECTRIC SHOCK, disconnect electric power to the product before
connecting or disconnecting the LAN cables.
6 Lightning Danger
Danger: DO NOT WORK on equipment or CABLES during periods of
LIGHTNING ACTIVITY.
7 Caution: The power cord is used as a disconnection device. to de-energize
equipment, disconnect the power cord.
8 Caution: Pluggable equipment, the socket outlet should be installed near
the equipment and should be easily accessible.
Electrical—Auto Voltage Adjustment
This product will automatically adjust to any voltage between the ranges
shown on the label.
Electrical—Type Class 1 Equipment
THIS EQUIPMENT MUST BE EARTHED. Power plug must be connected
to a properly wired earth ground socket outlet. An improperly wired socket
outlet could place hazardous voltages on accessible metal parts.
9 Caution: Air vents must not be blocked and must have free access to the
room ambient air for cooling.
10 Operating Temperature: This product is designed for a maximum
ambient temperature of 40 degrees C.
11 All Countries: Install product in accordance with local and National
Electrical Codes.
To Next Page
Loading...
Need help?
General
