Allied Telesis Layer 3 Switches - Which Products and Software Versions Does this Information Apply to

Which products and software versions does this information apply to?
Create A Secure Network With Allied Telesis Managed Layer 3 Switches 2
Appendix: Configuration scripts for MAC-forced forwarding example ................................... 27
Edge switch
1 .................................................................................................................. 27
Edge switch 2 .................................................................................................................................. 28
Edge switch 3 .................................................................................................................................. 29
Access Router ................................................................................................................................. 30
For information about the AlliedWare firewall, see the Firewall chapter of your Software
Reference, and the following How To Notes:
z How To Configure Some Basic Firewall And VPN Scenarios
z How To Apply Firewall Policies And Rules
How To Notes are available from www.alliedtelesis.com/resources/literature/howto.aspx.
Which products and software versions does this
information apply to?
This How To Note applies to the following Allied Telesis switch series:
z AT-8600
z AT-8700XL
z AT-8800
z Rapier i
z SwitchBlade
z AT-9800
z AT-8948 and x900-48
z AT-9900
z AT-9900s and x900-24
Some features are only available on some switches and/or some software versions.
Therefore, when this How To Note describes each feature, it lists the applicable switches and
versions.