Allied Telesis Layer 3 Switches - Appendix: Configuration Scripts for MAC-Forced Forwarding Example; Edge Switch 1

Create A Secure Network With Allied Telesis Managed Layer 3 Switches 27
Appendix: Configuration scripts for MAC-forced forwarding example
Appendix: Configuration scripts for MAC-forced
forwarding example
In this example (from page 23), the edge switches can be any of the following switches:
z Rapier 1 6fi and Rapier 24i (but not Rapier 48i)
z AT-8724XL (but not AT-8748XL)
z AT-8824 and AT-8848
z AT-8624T/2M, AT-8624PoE, and AT-8648T/2SP
The access router is a Rapier 24i switch.
Edge switch 1
Edge switch 1 is directly connected to the access router.
set system name="Edge Switch 1"
create vlan=Voice vid=100 private
create vlan=Video vid=200 private
create vlan=Data vid=300 private
create vlan=Management vid=400 private
create vlan=EAN_Management vid=500 private
enable stp=default
set stp=default mode=rapid
add vlan=100 port=1-2,49-50 uplink frame=tagged
add vlan=100 port=15 frame=tagged
add vlan=200 port=1-2,49-50 uplink frame=tagged
add vlan=200 port=15 frame=tagged
add vlan=300 port=1-2,49-50 uplink frame=tagged
add vlan=300 port=15 frame=tagged
add vlan=400 port=1-2,49-50 uplink frame=tagged
add vlan=400 port=15 frame=tagged
add vlan=500 port=1-2,49-50 uplink frame=tagged
set stp=default port=3-48 edgeport=yes
enable dhcpsnooping
enable dhcpsnooping arpsecurity
enable dhcpsnooping option82
set dhcpsnooping port=1 trusted=yes
set dhcpsnooping port=2 trusted=yes
set dhcpsnooping port=49 trusted=yes
set dhcpsnooping port=50 trusted=yes
set dhcpsnooping port=15 maxleases=4
# Specify the static IP of the residential gateway
add dhcpsnooping binding=00-0d-da-00-0b-11 ip=172.16.4.201 interface=vlan400
port=15 router=172.16.4.254
enable macff int=vlan100
enable macff int=vlan200
enable macff int=vlan300
enable macff int=vlan400
enable macff int=vlan500
enable ip
add ip int=vlan500 ip=172.16.5.101 mask=255.255.255.0
delete lacp port=3-50
enable lacp