29
http://www.alltraxinc.com
On power up, the controller will blink out a throttle code and then a Status or
Error Code (see below)
Throttle Type Codes:
1 Green LED Flash = 2-wire 0-5k throttle
2 Green LED Flash = 2-wire 5K-0 throttle
3 Green LED Flash = 0-5V throttle
4 Green LED Flash = EZGO ITS throttle
5 Green LED Flash = 3-wire 0-5k
6 Green LED Flash = 6 to 10.5 Taylor Dunn throttle
7 Green LED Flash = MCOR
8 Green LED Flash = Reserved
9 Green LED Flash = Pump
10 Green LED Flash = USB Throttle
11 Green LED Flash = Absolute Throttle
12 Green LED Flash = PWM_Throttle
Brake Type Codes:
1 Green LED Flash = 2-wire 0-5k throttle
2 Green LED Flash = 2-wire 5K-0 throttle
3 Green LED Flash = 0-5V throttle
4 Green LED Flash = Reserved
5 Green LED Flash = 3-wire 0-5k
6 Green LED Flash = 6 to 10.5 Taylor Dunn throttle
7 Green LED Flash = MCOR
8 Green LED Flash = Reserved
9 Green LED Flash = Reserved
10 Green LED Flash = USB Throttle
11 Green LED Flash = Absolute Throttle
BLINK CODES
To Next Page
Loading...
