ALLU D SERIES - ORIGINAL INSTRUCTION MANUAL - ALLU_6-M-DENG0615
2
2.5.3 Unanticipated and incorrect use ....................................................................... 17
2.5.4 Repairs and changes ......................................................................................... 17
3 Entry into service and use ............................................................................................ 18
3.1 Transport, lifting, and storage .............................................................................. 18
3.1.1 Transport .......................................................................................................... 18
3.1.2 Lifting and transfer .......................................................................................... 18
3.1.3 Long-term storage ............................................................................................ 20
3.2 Attachment to the base machine .......................................................................... 20
3.2.1 Mechanical attachment and adapters ............................................................... 20
3.2.2 Diagrams of adapters ....................................................................................... 23
3.2.3 Attachment to the base machine ...................................................................... 24
3.2.4 Connection of the hydraulic system and requirements for the system ............ 24
3.3 New users and procedures before use .................................................................. 30
3.3.1 Inspection upon receipt .................................................................................... 30
3.4 Use and operation ................................................................................................ 31
3.4.1 The principle of operation of the Screener crusher .......................................... 31
3.4.2 The first start-up and commissioning .............................................................. 31
3.4.3 Correct use ....................................................................................................... 32
3.4.4 Forbidden work methods: ................................................................................ 34
4 Maintenance ................................................................................................................. 36
4.1 Maintenance work in connection with use .......................................................... 37
4.1.1 Daily inspection (8 hrs) .................................................................................... 38
4.1.2 Weekly inspection (40 hrs) .............................................................................. 38
4.2 Extensive maintenance ........................................................................................ 40
4.3 Replacement of wear parts ................................................................................... 42
4.3.1 Replacement of blades (DN, DS, and DH models with XHD drums) ............. 42
Courtesy of Machine.Market
To Next Page
Loading...