ALLU D SERIES - ORIGINAL INSTRUCTION MANUAL - ALLU_6-M-DENG0615
78
3. The base machine is losing hydraulic oil and/or oil is leaking from the Screener
crusher’s chain housing or top housing:
Remove the round chain housing end covers (in single-motor models, remove only
the cover that is on the left as viewed from behind) and start the drum rotation. If oil
leaks from the bottom of the hydraulic motor shaft, the motor’s axial seal is damaged.
Contact your ALLU representative.
4.5 Disposal
A Screener crusher that has come to the end of its service life is composed mainly of metals
that can be recycled. Take the following steps before dismantling the machine for waste
metal:
Remove the hydraulic oil from the hydraulic hoses and motor.
Remove the lubricant mixture from the chain housing.
Detach all internal hydraulic hoses and grease tubes.
Dispose of the metal waste, oily tubes, and oil waste in an appropriate manner in accordance
with locally applicable guidelines and regulations.
CAUTION
Minimise the risk of hydraulic oil entering the environment by having
basins and material for absorbing any leaks available while disconnecting
the hydraulic system and dismantling the Screener crusher!
Courtesy of Machine.Market
To Next Page