ALLU D Series - Identification; Manufacturer; CE Marking and Conformity Declaration

ALLU D SERIES - ORIGINAL INSTRUCTION MANUAL - ALLU_6-M-DENG0615
5
1.2 Identification
The Screener crusher’s model and serial number can be found on the machine plate. Check
that the model matches the model list in this manual. It is important to indicate the serial
number in any discussion about the machine – for example, when ordering spare parts.
1.3 Manufacturer
This Screener crusher was manufactured by:
ALLU Finland Oy
Jokimäentie 1
16320 Pennala
FINLAND
Telephone:+358 3 882 140
+358 3 882 1440
Web: www.allu.net
E-mail: info@allu.net
1.4 CE marking and conformity declaration
The CE marking can be found on the machine plate. As it leaves the factory, this Screener
crusher meets all the health and safety requirements set forth in the Machinery Directive.
Store the EC-conformity declaration appropriately, and ensure that it is also passed on to any
new owner of the machine.
Courtesy of Machine.Market