ALLU D SERIES - ORIGINAL INSTRUCTION MANUAL - ALLU_6-M-DENG0615
33
The intended emptying angle is 20° to 90°
from horizontal level in relation to the
bottom plate.
Check that the position range of the base
machine’s booms allows the Screener
crusher to be tilted within the emptying
range presented in the picture.
Other operation tips:
Change any wear parts in good time. Worn blades reduce capacity and affect the
fragment size.
Clean the Screener crusher regularly when working with materials that are likely to
stick. Such materials adhere to the interior surfaces of the Screener crusher, drums,
and counter blades, reducing its capacity and creating additional strain.
The drums should be stopped before the bucket is completely empty, to keep stones
from being thrown and to improve the overall capacity (material usually passes
through more slowly when the Screener crusher is nearly empty).
20°
90°
Courtesy of Machine.Market
To Next Page