Allweiler Emtec Series - Associated Documentation

Á
ÁÁ
17
VM 623.0004 GB/07.00 – Ident–Nr. 550 298
9 Associated documentation
9.1 Sectional drawing, Pump sizes 20 – 40
EMTEC...D8.6 – Pump with suction and delivery casing, and threaded pipe connection, with shaft seal
Part No. Denomination
–––––––––––––––––––––––––––––––––
1 Delivery casing
2 Rotor housing
3 Pump cover, drive side
4 Suction casing
9 Pump cover, non–drive side
12 À Driving spindle
13 À Idler spindle
20 Intermediate cover
21 Labyrinth ring
22 Labyrinth ring
23 Á Spacer ring
24 Spacer ring
25 Thrust cover
26 À Balance bush
100 À Gasket
–––––––––––––––––––––––––––––––––
Part No. Denomination
–––––––––––––––––––––––––––––––––
121 À O–ring
122 À O–ring
126 À O–ring
129 À O–ring
130 À O–ring
140 À Joint ring
186 À Mechanical seal
200 Socket–head cap screw
201 Stud bolt
204 Socket–head cap screw
214 Screw plug
220 Hexagon nut
250 Hexagon nut
251 Hexagon nut
252 Â Hexagon nut
–––––––––––––––––––––––––––––––––
Part No. Denomination
–––––––––––––––––––––––––––––––––
270 Clamping sleeve
280 Rivet
290 Key
292 À Groove ball bearing
420 Screwed fitting
421 Pipe
422 Pipe
970 Name plate
980 Á Plug
981 Á Plug
À Spare parts/Replacement parts
 not existent with size 40
–––––––––––––––––––––––––––––––––
Á Remove plugs before start–up