Phone Guide - 9202
2. Press the Down Arrow button to select Preferences. Press the Select button .
3. Select from the following list using the Up / Down navigation arrows to make the changes:
a. LCD Contrast – Controls the contrast of the display. Use the Volume bar or Up / Down Arrow
buttons to adjust.
b.
Call History Size – Number of calls kept in History. 0 – 99 (Default: 99).
c.
Clock Mode – Time Display for LCD Screen.
i. Off
ii. 12 Hour (Default)
iii. 24 Hour
d.
Hold Reminder Mode – How the hold reminder should act.
i. No Reminder
ii. On Hook
iii. Timer (Default)
iv. On Hook and Timer
e.
Redial Memory – To have the last number dialed stored in the phone.
i. Enabled (Default)
ii. Disabled
iii. Timed
f.
Audible Dialing – Tones are heard when a key is pressed.
i. Enabled (Default)
ii. Disabled
g.
Call Timer Display – Displays the length of time during a call.
i. Enabled (Default)
ii. Disabled
h.
Intercom Auto Answer – When a call is placed to a phone using the INTERCOM button, the phone
receiving the call will automatically answer using Intercom.
i. Enabled (Default)
ii. Disabled
i.
On Hook Dialing – Speaker mode will be enabled when a number on the keypad is pressed. Allows
numbers to be dialed without lifting the handset. The handset must be used for any outbound audio.
i. Enabled (Default)
ii. Disabled
j.
Paging Enable Mode – If the phone is to allow pages to be received.
i. Never
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2008 Allworx. All rights reserved.
Revised: May 28, 2008
Page 18
To Next Page
Loading...
