Allworx 9202 - Check Statistics; Save Changes to Your Settings

Phone Guide - 9202
• LAN Connection Info
• PC Connection Info
5. Use the Up / Down navigation arrows to move through the list.
6. When finished, press the EXIT soft key.
7.9 Check Statistics
1. Select the CONFIG soft key.
2. Highlight Statistics.
3. Press the Select button .
4. The following information is listed:
• Audio Packet Stats
- RCV
- XMT
- Missed
- Loss Rate
- Max Jitter
• SIP Call Stats
- Incoming OK
- Outgoing OK
- Bad Address
- Refused Busy
5. Use the Up / Down navigation arrows to move through the list.
6. When finished, press the EXIT soft key.
7.10 Save Changes to Your Settings
Normally, you are prompted to save the changes you have made. You may, however, manually want to save
the changes.
1. Select the soft key that corresponds to CONFIG on the screen.
2. Highlight Save Settings.
3. Press the Select button
.
4. Select the YES soft key to save any changes OR select NO to cancel changes made.
5. Press the EXIT soft key.
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2008 Allworx. All rights reserved.
Revised: May 28, 2008
Page 22