Phone Guide – 9224
Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
Revised: April 16, 2013
Page 26
5.16 Park
Press the PARK button to park a call. The Allworx Server Administrator
defines the maximum wait time of parked call and the subsequent routing.
5.16.1 Park a Call on a Line Appearance PFK
Parking a call on a Line Appearance PFK resembles a “system-wide hold”.
Any phone with a Line Appearance PFK assigned to the same outside line
can retrieve the call. Available a system configured for Key System Behavior.
5.16.2 Park a Call from the Hold Screen
Press the PARK button to park the currently displayed call. This parks the
call without retrieving it from Hold. The HOLD button flashes red.
5.16.3 Retrieve a Parked Call
There are four ways to retrieve a parked call:
• Dial the parking extension.
• Parking Orbit PFK – enables monitoring any accessible parking orbit.
• Park Set Monitoring PFK - enables a single PFK to monitor a
configurable set of parking orbits via both the illuminated PFK button
as well as a list of calls parked in the specific orbits. For example,
users can use a single PFK to monitor all local park orbits and a
single indicator for any call placed in a parking orbit. This also
enables users to monitor the local parking orbits of a remote server
in a multi-site environment
• Press the PARK button, if there are no active calls on the handset.
The Allworx Server Administrator can define a PFK on the Allworx phone as
a Parking Orbit PFK for one or more of the parking extensions and set a
reminder to ring the handset after parking the call beyond a specified time.
Parking Orbit PFK State
Off (not lit) Parking Orbit is idle, no parked call.
To Next Page
Loading...
