7. TIME
7.1 REGION AND TIME
Choose whether the receiver time will be set automatically from the broadcast or set
manually. You also have the option to set „Daylight Saving Time“.
7.2 SLEEPING MODE
In this menu you can set the time after which the receiver automatically goes into
standby mode.
7.3 TIMER SETTINGS
It automatically records to a connected USB drive or plays the program according to
the timer event list you set.
1. Press the green button to set the timer. Select „Record“ or „Play“ mode. Enter the
required parameters and press the OK button to save the timer.
2. Editing or deleting a timer. In the Event Timer menu, highlight one event, press
the red or blue button, and cancel one or all timers. You can adjust the timer by
pressing the Yellow button.
7.4 POWER ON / OFF
In this menu you can set the time for the receiver to switch on or off automatically.
www.inter-sat.cz
45
To Next Page
Loading...