Alnor EBT730 - Chapter 2. Unpacking and Setting Up; Unpacking

7
Chapter 2. Unpacking and Setting Up
This chapter describes unpacking and setting up (preparing) the Electronic Balancing Tool (EBT) capture
hood for use.
Unpacking
As you unpack the instrument and accessories, check the components against your packing list. If any
parts are missing or damaged, notify us immediately. Tables 1 and 2 list available standard and optional
components.
Table 1: List of Standard and Optional Components
Item
Part No.
Models EBT730 and EBT731 Electronic Balancing Tools (Alnor)
EBT730
EBT731
Carrying case, EBT730
1319378
Carrying case, wheeled hood kit, EBT731
1319379
AA-size NiMH battery, four required
1208048
Two battery holders for four AA batteries
1801157
AC adapter
2182003
CONN AC EURO/IEC320
1302014
CONN AC AUST/IEC320
1302025
CONN AC UK/IEC320
1302015
Carry strap-tether
2913011
18” (46 cm) pitot probe
534534001
Two static pressure probes
3002017
16 ft (4.8 m) Neoprene tubing
3900031
LogDat-CH software
N/A
USB cable
1303754
Operation and Service Manual
6005725
Calibration certificate
N/A
Velocity Matrix Add On Kit
801090
Air Flow Probe - 18” (46 cm) straight pitot probe
800187
Temperature and Humidity Probe
800220
Swirl X Flow Conditioner
801213
Air Velocity and Temperature, Straight Probe
960
Air Velocity and Temperature, Articulating Probe
962
Air Velocity, Temperature, and Humidity, Straight Probe
964
Air Velocity, Temperature, and Humidity, Articulating Probe
966
Wireless Bluetooth printer
8934
Table 2: List of Optional Hood and Frame Kits
Item
Part No.
1 ft  4 ft (305 mm  1220 mm) fabric hood and frame kit
801200
2 ft  4 ft (610 mm  1220 mm) fabric hood and frame kit
801201
1 ft  5 ft (305 mm  1525 mm) fabric hood and frame kit
801202
3 ft  3 ft (915 mm  915 mm) fabric hood and frame kit
801203
16 in.  16 in. (406 mm  406 mm) fabric hood and frame kit
801209
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com