Alnor EBT730 - Page 26

22 Electronic Balancing Tool EBT730/EBT731
Table 3 identifies each Pressure Tool and the units of measure available each.
Table 3: Pressure Tool Selection and Display
Display Shows
Tool
Units Available
with flow units
Capture Hood
l/s, m
3
/hr, m
3
/s, CFM
Pressure units only
Pressure Only
in H
2
O, mm H
2
O, cm H
2
O, Pa, hPa, kPa,
mm Hg, cm Hg, in Hg,
with velocity or flow
units
Pitot Tube Velocity
Pitot Tube Flow
ft/min, m/s
l/s, m
3
/hr, m
3
/s, CFM
with velocity or flow
units
Air Flow Probe Velocity
Air Flow Probe Flow
ft/min, m/s
l/s, m
3
/hr, m
3
/s, CFM
with velocity units
Velocity Matrix
ft/min, m/s
Pressure units with K-
factor and flow units
Diffuser Flow
l/s, m
3
/hr, m
3
/s, CFM
Note
When the micromanometer is mounted on the base for use as a capture hood and the
headphone jack is connected, the unit will automatically default the Pressure Tool to Capture
Hood mode. The options when in the Pressure Tool menu will be Capture Hood or Hood
BP Mode.
MENU
Pressure Tool
Display Setup
Flow Setup
Actual/Std Setup
Settings
Data Logging
Bluetooth Functions
Applications
Cf Selection
Calibration
PRESSURE TOOL
Capture Hood
Hood BP Comp
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com