AlphaSmart 3000 3
CHAPTER 2
Quick Start
For users not interested in reading extended manuals, the following is a
quick guide for working with the AlphaSmart 3000. Please be sure to follow
these steps completely in the order given.
Step One — Using the AlphaSmart 3000
1. Charge your AlphaSmart 3000 by either installing three AA batteries or
recharging the battery pack.
2. Turn on the AlphaSmart 3000 by pressing the on/off key and then
begin typing. Your text will appear in the window.
3. Use the arrow keys to move your cursor in the text.
4. Use the backspace key to erase.
Step Two — Transferring Text to a Computer
1. Turn on your computer and make sure you are in an application that
accepts text input.
2. Connect the USB, PC Y, or Mac Y or cable to your computer.
3. Start up any application that accepts text and open a new file. You
must have a file open in this application in order to transfer files
from the AlphaSmart 3000.
4. Follow the directions for your particular set up:
•
Connect the AlphaSmart 3000 to your computer, attaching the
appropriate cable.
•
Infrared: Launch AlphaBeam on your Mac or PC. Point the infrared
lens of the AlphaSmart towards the IrDA transceiver.
5. Press the Send key on the AlphaSmart 3000.
6. Your text will appear on the AlphaSmart 3000 screen.
AS3000UG.book Page 3 Tuesday, June 25, 2002 12:19 PM
To Next Page
Loading...
