54 Advanced AlphaSmart 3000 Features
Password protection is ON.
Type master password to turn off:_____
4. Passwords are enabled. Press the esc key to exit the password
screen.
Setting an Individual Password
Each of the eight files can have their own unique password. When the
password feature is enabled, each individual file password is initially set
to “write”. If eight different students are to share an AlphaSmart
3000, instruct each student to set their own private password for their
own file. Tell them to use “write” as the old password.
Changing a Password
1. Turn the AlphaSmart 3000 on and make sure it is not connected to a
computer. Open file x (you might need to enter the password if
password protection is on).
2. Press option-x-P to show the Change Password dialog box. If
pressed in file 4, you will see:
Change password for file 4
Old password: _____
New password: _____
Press esc key to exit.
3. First type the old password, which is “write” if this is the first
time. (If you have forgotten the old password, the master
password may be entered by the teacher). As you type the old
password, Xs will appear for each character. If you type the
password incorrectly, the message Invalid password, please try
again will appear, and you can try again. When you correctly
type the old password, your screen will say:
Change password for file 4
Old password: XXXXX
AS3000UG.book Page 54 Tuesday, June 25, 2002 12:19 PM
To Next Page
Loading...
