Name: Alpine CDA-118M
Brand: Alpine
Rating: 5 (1 reviews)

To Next Page

To Previous Page

43-EN

• MiniTuner missing/disconnected or no communication between

the unit and XM Radio.

-Check the XM Tuner.

• The XM or SIRIUS antenna is not connected to the XM or

SIRIUS radio module.

- Check whether the XM or SIRIUS antenna cable is attached

securely to the XM or SIRIUS radio module.

• The Receiver is updating the SIRIUS channel line up. During

update, audio will be muted until update is completed.

- Wait until the channel update is completed. After completion,

the unit automatically re-tune to previous channel.

• Radio’s firmware is being updated. During firmware update,

audio will be muted until update is completed.

- Wait until the update is completed. After completion,

automatically re-tune to previous channel.

• The subscribed program is being updated. During update, audio

will be muted until update is completed.

- Wait until the update is completed. After completion, follow

the indication “SUB UPDT” to press any key on the unit to

continue, the unit re-tune to previous channel.

• XM or SIRIUS signal is too weak at the current location.

- Wait until the boat reaches a location with a stronger signal.

• Radio is acquiring audio or program information.

- Wait until the radio has received the information.

• The channel currently selected has stopped broadcasting.

- Select another channel.

• The user has selected a channel number that does not exist.

- The unit will revert back to the previously selected channel.

• The user has selected a channel number that does authorized.

- The unit will revert to the previous selected channel or to

channel 1 automatically.

Indication for SAT Receiver Mode

(SIRIUS mode)

(Blink) (SIRIUS mode)

(SIRIUS mode)

(XM mode)

(SIRIUS mode)

(XM mode)

Questions and Answers:

Need help?

Do you have a question about the Alpine CDA-118M and is the answer not in the manual?

Alpine CDA-118M Specifications

General