Alpine CDA9857 User Manual

12-EN
01GB05CDA-9857R.fm
ALPINE CDA-9857R 68-04123Z54-A (EN)
• If the CD does not eject, press and hold for at least 2 seconds.
• The CD-player can play discs containing audio data, MP3 data and
WMA data.
• A WMA format file that is protected by DRM (Digital Rights
Management) cannot be played back on this unit.
• The track display for MP3/WMA data playback is the file numbers
recorded on the disc.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
MP3/WMA Play Display
The folder number and file number will be displayed as
described below.
* Displayed when “Turning the Clock Display ON/OFF” (page 18) is
set to ON.
• Press TITLE to switch the display. See “Displaying the Text”
(page 16) for information about display switching.
Repeat Play
Press 4 to play back repeatedly the track being
played.
The track (file) will be played repeatedly.
Press 4 again and select off to deactivate repeat play.
CD mode :
*
1
When a CD changer is connected
• If REPEAT is set to ON during M.I.X. play in CD changer mode,
M.I.X. will apply to the current disc only.
MP3/WMA mode :
*
2
When an MP3 compatible CD changer is connected
• If a CD changer or an MP3 compatible CD changer is connected:
After pressing FUNC. to select the function mode (RPT/M.I.X.),
perform the operation within 10 seconds.
M.I.X. (Random Play)
Press 5 in the play or pause mode.
The tracks (files) on the disc will be played back in random
sequence.
To cancel M.I.X. play, press 5 again.
CD mode :
*
3
When a CD changer equipped with the ALL M.I.X. function is
connected
• If M.I.X. is set to ON during RPT (REPEAT ALL) play in CD
changer mode, M.I.X. will apply to the current disc only.
MP3/WMA mode :
• If a CD changer or an MP3 compatible CD changer is connected:
After pressing FUNC. to select the function mode (RPT/M.I.X.),
perform the operation within 10 seconds.
Searching from CD Text
Tracks can be searched and played by using the CD text on the disc. If a
disc is not compatible with text, or a disc is in the changer, searches can
be made by track number.
1 Press during play.
This will set the search mode.
2 Turn the Rotary encoder to select the desired
track, then press MODE.
This will play the selected track.
• Press and hold for at least 2 seconds in the search mode to
cancel. Or, the search mode will be cancelled when an operation has
not been performed in 10 seconds.
• CD text search cannot be made during M.I.X. play.
00:00
19 20
File number
display
Folder number display
Clock display*
: Only a track is repeatedly played back
: A disc is repeatedly played back
: Only a file is repeatedly played back
: Only files in a folder are repeatedly played bac
k
: A disc is repeatedly played back
: The tracks are played back in random
sequence.
: The tracks on all the CDs in the current
magazine will be played back in the random
sequence.
: Only files in a folder are played back in
random sequence.
: The files are played back in random
sequence.
If an MP3 compatible CD changer is
connected, all files in a disc are played back
in random sequence, and playback shifts to
the next disc.
01GB00CDA-9857R.book Page 12 Thursday, December 1, 2005 4:38 PM

Alpine CDA9857 Specifications

General

Brand	Alpine
Model	CDA9857
Category	Car Receiver
Language	English