Alpine CDA9857 User Manual

8-EN
01GB05CDA-9857R.fm
ALPINE CDA-9857R 68-04123Z54-A (EN)
Automatic Memory of Station Presets
1 Press BAND repeatedly until the desired radio band
is displayed.
2 Press and hold TUNE/A.ME for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into buttons 1 to 6 in
order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No. 1.
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
Tuning to Preset Stations
1 Press BAND repeatedly until the desired band is
displayed.
2 Press any one of the station preset buttons (1
through 6) that has your desired radio station in
memory.
The display shows the band, preset number and frequency
of the station selected.
• If the audio function mode is activated, press FUNC. to return to
preset mode.
Frequency Search Function
You can search for a radio station by its frequency.
1 Press and hold for at least 2 seconds in Radio
mode to activate Frequency Search mode.
2 Turn the Rotary encoder to select the desired
frequency.
3 Press MODE to receive the selected frequency.
• Press and hold for at least 2 seconds in the search mode to
cancel. Or, the search mode will be cancelled when an operation has
not been performed in 10 seconds.
Setting RDS Reception Mode and
Receiving RDS Stations
The RDS (Radio Data System) is a radio information system using the
57 kHz subcarrier of regular FM broadcast. The RDS allows you to
receive a variety of information such as traffic information, station
names, and to automatically re-tune to a stronger transmitter that is
broadcasting the same programme.
1 Press FUNC. to activate the audio function mode.
2 Press 1 AF to activate the RDS mode.
3 Press or to tune in the desired RDS
station.
4 Press 1 AF again to deactivate the RDS mode.
5 Press FUNC. to activate the preset mode.
• When the “Setting PTY31 (Emergency Broadcast) reception” (refer
to page 9) is set to on, if the unit receives the PTY31 (Emergency
Broadcast) signal, the unit will show “ALARM” in the display
automatically.
The RDS digital data includes the following:
Recalling Preset RDS Stations
1 Press FUNC. to activate the audio function mode.
2 Press 1 AF to activate the RDS mode.
3 Press FUNC. to activate the preset mode.
RDS
PI Programme Identification
PS Programme Service Name
AF List of Alternative Frequencies
TP Traffic Programme
TA Traffic Announcement
PTY Programme Type
EON Enhanced Other Networks
1 AF NEWS 2 3 PTY
FUNC.
TITLE
TA
MODE
MENU
Rotary
encoder
01GB00CDA-9857R.book Page 8 Thursday, December 1, 2005 4:38 PM

Alpine CDA9857 Specifications

General

Brand	Alpine
Model	CDA9857
Category	Car Receiver
Language	English