16-EN
01GB05CDA-9857R.fm
ALPINE CDA-9857R 68-04123Z54-A (EN)
Setting the Treble Control
You can change the Treble Frequency emphasis to create your own tonal
preference.
1
Press MENU to select the BASS ENGINE mode, then
press MODE.
BASS ENGINE SETUP RETURN (OFF) BASS ENGINE
2
Press or to select the TREBLE (treble
Centre frequency) control mode.
BASS TREBLE
3
-1 Press SOURCE/POWER to select the desired treble
Centre frequency.
10.0kHz 12.5kHz 15.0kHz 7.5kHz 10.0kHz
Emphasizes the displayed Treble frequency ranges.
3
-2
*2
Turn the Rotary encoder to select the desired
treble level (–7~+7).
You can emphasize the treble level.
4
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
• If no operation is performed within 60 seconds, the treble control
setting will be turned off automatically.
• The treble level settings will be individually memorized for each
source (FM, MW (LW), CD, etc.) until the setting is changed. The
Treble frequency settings adjusted for one source are effective for all
other sources (FM, MW (LW), CD, etc.).
• Depending on the connected devices, some functions and display
indications do not work. However, Treble Level is still adjustable if
an audio processor with the Treble function is connected.
• This function is inoperable when DEFEAT is set to ON.
• If you press or in the treble control mode, the unit
changes to the bass control mode.
*
2
The adjustment can also be made by pressing the MODE. Refer to
“Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
(Between Front and Rear)/Defeat” (page 15).
Turning Loudness On/Off
Loudness introduces a special low- and high-frequency emphasis at low
listening levels. This compensates for the ear's decreased sensitivity to
bass and treble sound.
Press and hold MODE for at least 2 seconds to activate
or deactivate the loudness mode.
“((LOUD))” indicator lights.
Displaying the Text
Text information, such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is also possible to
display the folder name, the file name, and the tag, etc., while playing
MP3/WMA files.
Press TITLE.
The display will change every time the button is pressed.
The display in Radio mode:
If there is PS (Programme Service Name)
If there is no PS (Programme Service Name)
Setting the Treble Centre Frequency
Setting the Treble Level
Other Functions
TITLEFUNC.
PS(Programme Service Name)
(Blank)
*
1
PS(Programme Service Name)
*
CALENDAR/CLOCK
1
PS(Programme Service Name)
*
PTY (Programme Type)
1
Radio Text
Radio Text
(Blank)
(Blank)
PS(Programme Service Name)
(Blank)
*
1
FREQUENCY
(Blank)
FREQUENCY
CALENDAR/CLOCK
FREQUENCY
PTY (Programme Type)
Radio Text
Radio Text
(Blank)
(Blank)
FREQUENCY
(Blank)
01GB00CDA-9857R.book Page 16 Thursday, December 1, 2005 4:38 PM
To Next Page
Loading...
Need help?
General
