Alpine CDA9857 User Manual

21-EN
01GB05CDA-9857R.fm
ALPINE CDA-9857R 68-04123Z54-A (EN)
An iPod™ can be controlled from the CDA-9857R/CDA-9856R, when
connected to an optional ALPINE Interface Adapter for iPod™
(KCA-420i). While connected to the CDA-9857R/CDA-9856R through
the KCA-420i, the controls on the iPod™ are disabled.
• For details, refer to the Owner’s Manual of the connected adapter
(KCA-420i).
• For each function, refer to the iPod’s documentation.
About iPods™ usable with this unit
• The unit can be used with third generation and above iPod™,
iPod™ photo, iPod™ minis or iPod™ nano. iPod™ Shuffle
cannot be used, however.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The unit can be used with the following iPod versions.
Correct function of earlier versions cannot be guranteed.
Third generation iPod:Ver. 2.3
Forth generation iPod:Ver. 3.0.2
iPod photo:Ver. 1.1
iPod mini:Ver. 1.3
iPod nano:Ver. 1.0
• The unit cannot be used with the software versions earlier
than “2005-02-22”. For details about “iPod Software Update”,
refer to the iPod Instruction Manual.
Playback
1 Press SOURCE/POWER to switch to the iPod
mode.
TUNER DISC iPod TUNER
2 Press or to select the desired song.
3 To pause playback, press / .
Pressing / again will resume playback.
• If a song is playing on the iPod when it is connected to the
CDA-9857R/CDA-9856R, it will continue playing after the
connection.
• If using the iPod with a changer, the Versatile Link Terminal
(KCA-410C) must be used. In this case, press BAND to select the
changer mode applicable to the iPod.
Searching for a desired Song
An iPod can contain hundreds of songs. By keeping these songs
organized in playlists, the CDA-9857R/CDA-9856R can use these to
ease song searches.
1 Press to activate the search selection mode.
2 Turn the Rotary encoder to select the Playlist
search mode, then press .
Playlist Artist Album Playlist
3
*1
Turn the Rotary encoder within 10 seconds, and
select a playlist.
4 Press / to play back a selected playlist.
To search for a song in the selected playlist
1 After selecting the playlist in step 3*
1
, press to change
to the song search mode of the selected playlist.
2 Turn the Rotary encoder within 10 seconds to select a
song and press MODE.
The selected song is played back.
• Press and hold for at least 2 seconds in the search mode to cancel
the search mode.
• All songs in the iPod are played back by selecting the stored “iPod
name” in step 3*
1
.
• Playlist search cannot be made during M.I.X. play.
1 Press to activate the search selection mode.
2 Turn the Rotary encoder to select the Artist search
mode, then press .
Playlist Artist Album Playlist
3
*2
Turn the Rotary encoder within 10 seconds, and
select an artist.
4 Press / to play back all songs of the selected
artist.
To search for an album of the selected artist
1 After selecting the artist in step 3*
2
, press to change
to the album search mode of the selected artist.
2
*1
Turn the Rotary encoder within 10 seconds to select an
album.
3 Press / to play back all songs of the selected
album.
iPod™ (Optional)
Return to the beginning of the current song:
Press .
Fast backward:
Press and hold .
Advance to the beginning of the next song:
Press .
Fast forward:
Press and hold .
SOURCE/
POWER
MODE
Rotary
encoder
4
/
TITLE
5
BAND
Searching by Playlist
Searching by artist name
01GB00CDA-9857R.book Page 21 Thursday, December 1, 2005 4:38 PM

Alpine CDA9857 Specifications

General

Brand	Alpine
Model	CDA9857
Category	Car Receiver
Language	English