Alpine CDE-177BT - About Text; Using the Front AUX Input Terminal; Option Menu Setting

24-EN
*3 ID3 tag/WMA tag
If an MP3/WMA/AAC file contains ID3 tag/WMA tag
information, the ID3 tag/WMA tag information is displayed
(e.g., song name, artist name, and album name). All other
tag data is ignored.
If there is no tag information, “ARTIST”/“ALBUM”/“SONG”
is displayed.
*4 Depending on the connected Smartphone, the elapsed time
may not be displayed.
Text compatible CDs contain text information such as the disc name and
track name. Such text information is referred to as “text”.
Notes
• Some characters may not be displayed correctly with this device,
depending on the character type.
• “NO SUPPORT” is displayed when the desired text information cannot
be displayed on this unit.
• The text or tag information may not be correctly displayed, depending
on the contents.
Using the Front AUX Input Terminal
Connect a portable music player, etc. by simply connecting it to the
input on the front panel. An optional adapter cable is required (standard
RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini-phono plug).
Press VSOURCE, and select the AUXILIARY mode to
listen to the portable device.
Notes
• This function is available only when AUX SETUP is set to ON. For
details, refer to “Setting the AUX SETUP mode” on page 27.
• Do not connect a USB memory Device and an AUX Input Terminal
connector at the same time.
Option Menu Setting
You can quickly adjust the setting items relevant to the current SOURCE
by using Option Menu.
1 Press and hold ENTER/OPTION for at least 2 seconds
to activate the Option menu of the current source.
Note
• The option menu varies depending on the source.
2 Turn the Rotary encoder to select the desired setting
item, and then press ENTER.
3 Turn the Rotary encoder to change the setting, and then
press ENTER.
After the setting, the display will return to the current source
automatically.
The following setting items are displayed when LANGUAGE is set
to ENGLISH. For details, refer to “Setting the Menu Language” on
page 27.
 Setting item:
TUNER mode:
PTY SELECT
*1
 TUNER SET
*2
 VOL LV ADJ
*3
 DIMMER
*4

PTY SELECT
DISC mode:
CD SET
*5
 VOL LV ADJ
*3
 MX SETTING
*6
 DIMMER
*4

CD SET
USB mode:
USB SET
*7
 VOL LV ADJ
*3
 MX SETTING
*6
 DIMMER
*4

USB SET
iPod mode:
APP DIRECT
*8
 IPOD SET
*9
 VOL LV ADJ
*3
 MX SETTING
*6
 DIMMER
*4
 APP DIRECT
AUX mode:
AUX SET
*10
 VOL LV ADJ
*3
 MX SETTING
*6
 DIMMER
*4

AUX SET
vTuner mode:
VOL LV ADJ
*3
 MX SETTING
*6
 DIMMER
*4
 VOL LV ADJ
BT AUDIO mode:
BT SET
*11
 VOL LV ADJ
*3
 MX SETTING
*6
 DIMMER
*4

BT SET
Phone mode (Non-calling mode):
PHONE SET
*12
 VOL LV ADJ
*13
 DIMMER
*4
 PHONE SET
Phone mode (Calling mode):
MIC GAIN
*14
 CALL SOUND
*14
 SPK SWITCH
*15

VOICE MUTE
*16
 CALL WAIT
*17
 END CALL
*18

VOL LV ADJ
*13
 DIMMER
*4
 MIC GAIN
*1 Refer to “PTY (Programme Type) Tuning” on page 13.
*2 The setting items are the same as TUNER setting in SETUP
mode. For details, refer to “SETUP” on page 26.
*3 You can individually emphasise or weaken the volume level
of the current source to create your own tonal preference. The
setting values in Option mode and in SETUP mode are
linked. Refer to “Setting the Source Volume Level” on page 18.
*4 Refer to “Dimmer Control” on page 28.
*5 PLAY MODE can be selected in this mode. For details, refer
to “Playing MP3/WMA/AAC Data (PLAY MODE)” on
page 27.
*6 Refer to “Setting the Media Xpander mode” on page 19.
*7 USB SKIP can be selected in this mode. For details, refer to
“Setting the USB Skip function” on page 28.
*8 Refer to “Setting the iPod Control” on page 38.
About “Text”
Portable player, etc.
Main unit
or
Optional adapter cable (RCA pin
plugs [red, white] 3.5ø miniplugs)
or (3.5ø miniplugs).