Alpine CPS182 - Caution and Safety; Safe Handling and Operation; Features; Product Highlights

Alpine Quick Tip
• If your pump is making abnormal loud noises Turn to the Left / Counter- •
Disconnect the pump from the electrical Clockwise to turn down power supply and
remove the front cover & the water flow. Turn the plate
adjuster to the Right / • Carefully grip the impeller and gently pull the Clockwise to
turn up the impeller/rotor assembly out of the pump
water flow. housing
• Rinse the impeller/rotor assembly and clean the cavity with clean water. If
breakage or
damage is found, contact your local retailer
4 for parts. 9
CAUTION
FEATURES
• Always unplug the pump from the
electrical outlet before cleaning &
handling
• Use with clean water only, do not place
the fountain and/or parts in any other
liquid.
• Periodically change water & clean the
pump to keep free from microorganisms
• Disconnect and store the unit in a dry
place if not in use for an extended period
of time, or during freezing weather.
• Do not operate the fountain in
temperatures below 41° F / 5° C.
• Do not operate with water above 90°F /
30°C.
• Do not lift, carry or pull the pump by the
power cord.
• Do not exceed the maximum voltage &
wattage on transformer.
• NEVER LET THE PUMP RUN DRY.
10